Additional contact NHI-E-11-PKZ0 EATON (front)

Description Additional contact NHI-E-11-PKZ0 EATON (front)

Number of contacts: 1 normally open (NO) + 1 normally closed (NC)
Mounting type: Front
Purpose: For automatic control of motors PKZM0, PKM0, PKE
Vikoristan category: AC-15
Nominal operating flow (AC-15) at 230 V: 4 A
Nominal operating flow (AC-15) at 400 V: 3 A
Nominal operating flow (AC-15) at 690 V: 1 A
Wiki category: DC-13
Nominal operating flow (DC-13) at 24 V: 1 A
Nominal operating flow (DC-13) at 60 V: 0.8 A
Nominal operating flow (DC-13) at 110 V: 0.5 A
Nominal operating flow (DC-13) at 220 V: 0.3 A
Nominal insulation voltage (Ui): 690 V AC
Nominal impulse voltage (Uimp): 6 kV
Terminal type: Gvintovi
Cross-cutting of connected conductors (mono-core, 1 conductor): 0.75 - 2.5 mm²
Cross-section of connected conductors (mono-core, 2 conductors): 0.75 - 2.5 mm²
Cross-section of connected conductors (high-core without ferrule, 1 conductor): 0.75 - 2.5 mm²
Cross-section of connected conductors (high-core without tip, 2 conductors): 0.75 - 2.5 mm²
Cross-section of connected conductors (high-core with tip, 1 conductor): 0.75 - 2.5 mm²
Cross-section of connected conductors (high-core with ferrule, 2 conductors): 0.75 - 1.5 mm²
Terminal protection level: IP20
Operating temperature range: -25 °C to +60 °C
Saving temperature range: -40 °C to +80 °C
Mechanical wear resistance: 5 x 10^6 cycles
Electrical endurance (AC-15, 230 V, 4 A): 0.1 x 10^6 cycles
Compliance with standards: IEC/EN 60947-5-1, UL, CSA