Additional relay DILA-31 230V 50Hz EATON

Description Additional relay DILA-31 230V 50Hz EATON

Virobnik: Eaton
Model: DILA-31
Device type: Auxiliary relay
Series: xStart
Nominal coil voltage: 230 V AC
Coil frequency: 50 Hz
Coil type: Zmіnny (AC)
Coil tension reduced (start): 28 VA
Increased tension of the cat (trival): 4.5 VA
Number of additional contacts in NV: 3
Number of additional contacts NC: 1
Nominal insulation voltage Ui: 690 In AC
Nominal impulse voltage Uimp: 6 kV
Overvoltage category: III
Washroom heat source Ith: 10 A (at 60 °C)
Nominal operating flow Ie (AC-15, 220-230V): 4 A
Nominal operating flow Ie (AC-15, 380-400V): 3 A
Nominal operating flow Ie (AC-15, 500V): 2 A
Nominal operating flow Ie (DC-13, 24V): 10 A
Nominal working stage Ie (DC-13, 60V): 6 A
Nominal operating power Ie (DC-13, 110V): 3 A
Nominal operating power Ie (DC-13, 220V): 1 A
Minimum switching current: 1 mA (at 17 V)
Mechanical wear resistance: 10 x 10^6 cycles
Electrical wear resistance: 1 x 10^6 cycles (AC-15, 230V, 4A)
Operating temperature range: -25 to +60 °C
Saving temperature range: -40 to +80 °C
Protection level (clem): IP20
Protection stage (housing): IP00
Installation method: On a 35 mm DIN rail or with screws
Overall dimensions (WxHxD): 45 x 58 x 102 mm
Vaga: 0.28 kg
Maximum installation height: 2000 m
Compliance with standards: IEC/EN 60947-5-1
Connection type: Screw terminals
Conductor overcut (minimal): 0.75 mm²
Pererez conductor (maximum): 2.5 mm²
Terminal tightening torque: 0.8 Nm