Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole, 2000A, HIC493G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole, 2000A, HIC493G

Model: HIC493G
Type of attachment: Peremikach AVR
Viconny type: Corpus
Drive: Motorization
Keruvannya: Controller
Mimicking scheme: I-0-II
Number of poles: 4
Nominal flow (In): 2000 A
Nominal operating voltage (Ue): 400 V AC
Nominal insulation voltage (Ui): 1000 V AC
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Number of phases: 3
Number of wires: 4
Drying category: AC-33iB
Nominal short-hour vitrification flow (Icw): 15 kA / 1 s
Nominal impact current (Ipk): 37.5 kA
Mechanical wear resistance: 8000 cycles
Electrical wear resistance: 2000 cycles
Hour of loud muttering: < 200 ms
Hour of system mixing (setting): 0.5 - 3 s
Controller/drive voltage: 230 V AC
Increased drive power (max.): 100 W
Housing protection level: IP54
Operating temperature range: -5°C to +40°C
Temperature range: -25°C to +70°C
Water content: 5% - 95% non-condensing
Maximum altitude above the sea level: 2000 m
Appearance standard: IEC 60947-6-1
Display type: RC display
Communication interface: RS485 (Modbus RTU)
Functions controller: Monitoring of voltage, frequency, phase sequence, phase loss protection
Adjustable trims: Yes
Robot modes: Automatic, Manual, Test
Installation type: Underfloor / Wall