Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 200A, HIC420G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 200A, HIC420G

Type of attachment: Peremikach AVR housing with motor drive
Model: HIC420G
Nominal flow: 200 A
Number of poles: 4P
Mixing configuration: I-0-II
Controller's presence: Yes
Nominal operating voltage (Ue): 400 V AC
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Remixer type: PC-class
Nominal short-hour vitrification strum (Icw): 10 kA (1s)
Nominal boundary switching current (Icm): 20 kA
Nominal frequency: 50/60 Hz
Contact mixing time: < 50 ms
Live transmission hour (background): 1 - 3 s
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 3000 cycles
Nominal control voltage (motor drive): 230 V AC
Increased tension (motor drive): < 30 W (per hour) muttering)
Housing protection level: IP40
Controller display: LCD
Robot controller modes: Automatic, manual, remote
Functions of voltage monitoring by the controller: Voltage increased, voltage decreased, phase loss, phase loss
Adjustable controller timers: Intermittent delay, rotation delay, generator start delay, generator delay, voltage stabilization delay
Communication interface: RS485 (Modbus RTU)
Additional contacts: 2NO+2NC (position of dzherel on the skin)
Operating temperature range: -5°C to +40°C
Temperature range: -25°C to +70°C
Water content: 5% - 95% (non-condensing)
Height above the sea level: up to 2000 m
Appearance standards: IEC/EN 60947-6-1
Installation: Wall/Underground (integrated into the housing)