Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 160A, HIC416E

Description Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 160A, HIC416E

Type of device: Automatic transfer switch to reserve (AVR)
Configuration: Hull, motorized
Mimicking scheme: I-0-II
Number of poles: 4
Nominal flow (In): 160 A
Nominal operating voltage (Ue): 230/400 V AC
Nominal frequency: 50/60 Hz
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Drying category: AC-33B
Nominal short-hour vitrification flow (Icw): 10 kA (1 s)
Nominal peak vitrification flow (Icm): 22 kA
Mechanical wear resistance: 10,000 alternation cycles
Electrical wear resistance: 3000 alternating cycles
Hour of loud muttering: < 100 ms
Hour of mixing (programming): 0.5 - 60 s
Hour of refreshment (programming): 0.5 - 60 s
Controller type: Internal microprocessor
Monitoring circuit parameters: Voltage (phase-neutral, phase-phase), frequency, phase sequence
Functions of the controller: Lost phase, overvoltage, undervoltage, phase imbalance, under/overfrequency
Functions of the body: Active tension, reactive tension, active tension, energy (kW*year)
Communication interface: RS485
Communication protocol: Modbus RTU
Display: RC display
Indication: Dzherel status (I/II), alarm status, emergency notice
Adjustment: Front panel ceramic
Robot modes: Automatic, manual, test
Housing protection level: IP54
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +85°C
Water content: 5% - 95% non-condensing
Installation method: Vertical
Body color: Gray
Vaga: 10-15 kg
Compliance with standards: IEC 60947-6-1