Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 200A, HIC420E

Description Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 200A, HIC420E

Nominal flow: 200 A
Number of poles: 4
Type of remix pump: Automatic transfer to reserve (AVR)
Remixer positions: I-0-II (Merezha 1 – Vimkneno – Merezha 2)
Nominal operating voltage (Ue): 400 V AC
Maximum operating voltage: 690 V AC
Nominal insulation voltage (Ui): 1000 V AC
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Stacking category: AS-33V
Nominal short-hour vitrification flow (Icw): 3 kA (1 s)
Nominal short-circuit current (Icc): 20 kA (with auxiliary protection)
Nominal voltage: 230 V AC
Operating voltage range: 85% - 110% Un
Increased power of the motor drive: 10 VA
Interconnection hour (connection from device 1 to connection to device 2): < 100 ms
Time to go in position "0": < 60 ms
Hour of use of the motor drive: 2-3 s
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 1500 cycles (at Ue, Ie)
Type of treatment: Automatic, manual (local), remote
Mechanical blocking: Nayavne
Electrical blocking: Nayavne
Controller display type: Graphic RK display with switches
Variable parameters: Voltage (phase-neutral, phase-phase), flow (phase-by-phase), frequency, active tightness, reactive tightness, full tightness, tightness coefficient, active energy (regeneration/generation), reactive energy
Voltage measurement accuracy: ±0.5%
Imaging accuracy: ±0.5%
Energy accuracy: Class 1.0 (active), Class 2.0 (reactive)
Communication interface: RS485 (Modbus RTU protocol)
Number of digital inputs: 6 (configurable)
Quantity relay outputs: 4 (configured)
Memory: 500 entries (with hour marker)
Anniversary of the real hour (RTC): Vbudovaniy, with reserves
Shutdown settings: Shutdown hour for starting the generator, shutdown hour for mixing, shutdown hour for turning, cooldown hour for the generator
Basic functions of the controller: Protection from under/overvoltage, protection from phase loss, protection from phase sequence failure, protection from under/overfrequency, protection against revantage (optional)
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +85°C
Water content: 5% - 95% (non-condensing)
Height above the level of the sea: Up to 2000 m (without derating)
Housing protection level: IP54
Mounting type: Wall
Body material: Metal
Overall dimensions (HxWxD): 600 x 400 x 250 mm
Vaga: 20 kg
Rethread the cable for connection: 70-120 mm²
Compliance with standards: IEC 60947-6-1, DSTU EN 60947-6-1