Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 2500A, HIC494E

Description Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 2500A, HIC494E

Device type: Automatic transfer switch
Model: HIC494E
Structurally viconanny: Korpusny
Drive mechanism: Motorized
Number of poles: 4
Number of working positions: 3
Remixer positions: I-0-II
Nominal flow (In): 2500 A
Nominal operating voltage (Ue): AC 400 V
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Drying category: AC-33B
Nominal short-hour vitrification flow (Icw) (1 s): 50 kA
Nominal short-circuit current: 105 kA
Mimicking hour (without programmed stops): Up to 100 ms
Mechanical life: 10000 cycles
Electrical life: 3000 cycles
Control voltage: AC 230 V / DC 24 V
The presence of a fake controller: So
Controller display type: LCD graphic
Controller functions: Voltage monitoring (L-L, L-N), Frequency monitoring, Phase change monitoring, Phase asymmetry monitoring, Phase loss monitoring
Functions of the circuit (dimming): Phase flow (I), Phase voltage (U), Frequency (f), Active tension (P), Reactive tension (Q), Increased tension (S), Force factor (PF), Active energy accumulation (kW*year)
Communication interfaces: RS-485
Communication protocols: Modbus RTU
Robot modes: Automatic, Manual, Blocking
Programmed exercises: Yes
Trimming range for detected engine malfunction: 0-10 s
Trimming range of switching to reserve: 0-60 s
Turning range on the main body: 0-60 min
Generator startup delay range: 0-10 s
Generator trimming range: 0-10 min
Voltage stabilization/generator frequency stabilization range: 0-10 s
Step Protective housing: IP54
Operating temperature range: -25...+55 °C
Temperature range: -40...+70 °C
Water content: 5-95% (non-condensing)
Maximum altitude above the sea level: 2000 m
Compliance with standards: IEC 60947-6-1