Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4p 2000A, HIC493E

Description Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4p 2000A, HIC493E

Device type: Automatic input transfer switch (AVR)
Vikonannya: Corpusne
Drive type: Motorized
Model/Series: HIC493E
Number of poles: 4
Work position: I-0-II
Nominal flow (In): 2000 A
Nominal operating voltage (Ue): 400 V AC
Nominal insulation voltage (Ui): 1000 V AC
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Drying category: AC-33B
Nominal short-hour vitrification flow (Icw) (1s): 50 kA
Nominal peak vitrification flow (Icm): 105 kA
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 3000 cycles
Intermittent hour (mechanical): < 200 ms
Controller type: Internal microprocessor
Controller functions: Voltage monitoring, Low phase protection, Output protection phase asymmetry, Undervoltage/overvoltage protection, Intermittency adjustment settings, Manual control, Automatic control
Controller display: LCD with switches
Indication: Light (LED), Text (on display)
Controller life: Autonomous (within control lines) / 230 V AC
Variable parameters: Stream (A), Voltage (V), Frequency (Hz), Active power (kW), Reactive power (kvar), Total power (kVA), Force coefficient (cos φ), Active energy (kW year), Reactive energy (kvar year)
Vibration energy accuracy: Class 1.0
Communication interface: RS-485
Communication protocol: Modbus RTU
Possibility of remote monitoring: Yes
Possibility of distant keruban: So
Housing protection level: IP54
Operating temperature range: -25°C ... +70°C
Temperature range Saving: -40°C ... +85°C
Water content: 5% ... 95% non-condensing
Compliance with standards: IEC 60947-6-1
Mounting type: Wall / Undermount