Contactor 25A, 2HB, 24V Hager ESD225

Description Contactor 25A, 2HB, 24V Hager ESD225

Nominal flow: 25 A
Number of head contacts: 2 НВ
Contact type: normally open (NV)
Nominal voltage of the control coil: 24 V AC
Coil control type: AC
Nominal operating voltage: 250 V AC
Nominal insulation voltage (Ui): 400 V
Nominal impulse voltage (Uimp): 4 kV
Nominal frequency: 50/60 Hz
Stacking category: AC-1
Drying category: AC-3
Drying category: AC-7a
Stacking category: AC-7b
Switching power AC-1 (230V): 5.75 kW
Switching power AC-1 (400V): 10 kW
Switching power AC-3 (230V): 1.5 kW
Switching power AC-3 (400V): 2.2 kW
Switching power AC-7a (230V): 5.75 kW
Switching voltage AC-7a (400V): 10 kW
Switching power AC-7b (230V): 1.5 kW
Switching power AC-7b (400V): 2.2 kW
Increased tension of the coil (on): 9 VA
Increased tension of the cat (morning): 2.7 VA
Electrical wear resistance (AC-1): 300,000 cycles
Electrical wear resistance (AC-3): 100,000 cycles
Mechanical wear resistance: 1,000,000 cycles
Maximum number of commutations per hour: 600
Application hour: 10-25 ms
Release hour: 10-20 ms
Cross-cutting of the connected cable (single-core): 1-10 mm²
Cross-cutting of the connected cable (high-core): 1-6 mm²
Dove for stripping insulation: 9 mm
Terminal tightening torque: 1.2 Nm
Mounting type: DIN rail
Width: 1 module (17.5 mm)
Height: 83 mm
Glibin: 60 mm
Front panel protection level: IP40
Terminal protection level: IP20
Vaga: 0.165 kg
Operating temperature: -10...+50 °C
Storage temperature: -40...+70 °C
Appearance standard: IEC/EN 61095