Contactor DILM 12-10 (24VDC) EATON

Description Contactor DILM 12-10 (24VDC) EATON

Number of head poles: 3
Number of head NO contacts: 3
Number of additional contacts: 1
Nominal operating voltage (Ue): up to 690 V AC
Nominal insulation voltage (Ui): 690 V AC
Nominal impulse voltage (Uimp): 6 kV
Nominal operating stage AC-3 (400V): 12 A
Nominal operating voltage AC-3 (230V): 3 kW
Nominal operating power AC-3 (400V): 5.5 kW
Nominal operating voltage AC-3 (690V): 5.5 kW
Nominal heat source AC-1 (400V, 60°C): 22 A
Short-hour vitrification strum (Icw, 1s): 192 A
Peak vitrification flow (Ipk): 1000 A
Vikoristan category: AC-1, AC-3
Nominal voltage of the coil: 24 V DC
Increased tension of the cat (retraction): 2.5 W
Spozhivana tension of the cat (morning): 2.5 W
DC coil operating voltage range: 0.8 - 1.15 x Us
Mechanical life: 10 million cycles
Electrical life (AC-3, 400V): 1.5 million cycles
Maximum switching frequency AC-3: 1000 cycles/year
Nominal current of auxiliary contacts AC-15 (230V): 6 A
Nominal current of auxiliary contacts DC-13 (24V): 10 A
Operating temperature range: -25°C to +60°C
Temperature range: -40°C to +80°C
Protection level (clem): IP20
Height above the sea level: up to 2000 m
Mounting method: DIN rail 35 mm / Screw
Overall dimensions (WxHxD): 45 x 75 x 117 mm
Vaga: 0.36 kg
Connection cross-section of head terminals (mono-core/multi-core): 1x(1-6 mm²) / 2x(1-6 mm²)
Cutting through the connection of auxiliary/ceramic terminals (solid/multi-core): 1x(0.75-2.5 mm²) / 2x(0.75-2.5 mm²)
Head terminal tightening torque: 2 Nm
Tightening torque of additional/solid terminals: 0.8 Nm
Recommendations for protection (AC-3 engine protection): 16 A (gG/gL)
Recommended protection (line protection AC-1): 25 A (gG/gL)
Compliance with standards: IEC/EN 60947-4-1