Contactor DILM 95 230V 50Hz EATON

Description Contactor DILM 95 230V 50Hz EATON

Product type: Contactor
Series: DILM
Size: DILM95
Number of poles: 3
Added additional contacts: 1 NV + 1 NC
Vikoristan categories: AC-1, AC-3
Standards: IEC/EN 60947, VDE 0660, UL, CSA
Nominal operating voltage (Ue): up to 690 V AC
Nominal insulation voltage (Ui): 690 V AC
Nominal shock voltage (Uimp): 8000 V
Nominal thermal resistance level (Ith) AC-1, 50-60 Hz, 40 °C: 125 A
Nominal operating stage (Ie) AC-1, up to 690 V, 40 °C: 125 A
Nominal operating stage (Ie) AC-1, up to 690 V, 60 °C: 100 A
Nominal operating stage (Ie) AC-3, 220 V: 95 A
Nominal operating flow (Ie) AC-3, 380 V: 95 A
Nominal operating flow (Ie) AC-3, 400 V: 95 A
Nominal operating flow (Ie) AC-3, 690 V: 62 A
Nominal engine power (P) AC-3, 220 V: 30 kW
Nominal engine power (P) AC-3, 380 V: 45 kW
Nominal engine power (P) AC-3, 400 V: 45 kW
Nominal engine power (P) AC-3, 690 V: 55 kW
Nominal short-circuit current (Iq) with capacitor 125 A gG/gL: 100 kA
Maximum short-hour vitrification Stream (Icw) at 1 sec: 1400 A
Voltage type: AC
Nominal voltage (Us): 230 V
Current frequency: 50 Hz
Increased tension of the coil when retracted: 170 VA
Reduced tension of the cat in the morning: 19 VA
Thermal output of the coil (steady mode): 3.5 W
Coil spray range (AC): 0.8 - 1.15 x Us
Nominal operating voltage of auxiliary contacts (Ie) AC-15, 220/230/240 V: 6 A
Nominal operating current of auxiliary contacts (Ie) AC-15, 380/400/415 V: 3 A
Nominal operating current of auxiliary contacts (Ie) AC-15, 690 V: 1 A
Nominal operating current of auxiliary contacts (Ie) DC-13, 24 V: 6 A
Nominal operating current of auxiliary contacts (Ie) DC-13, 60 V: 2.5 A
Nominal operating current of auxiliary contacts (Ie) DC-13, 110 V: 1.1 A
Nominal operating current of auxiliary contacts (Ie) DC-13, 220 V: 0.5 A
Mechanical life: 10 x 10^6 cycles
Electrical life (AC-3, 400V): 1.5 x 10^6 cycles
Operating temperature: -25 to +60 °C
Storage temperature: -40 to +80 °C
Step protection of the head lancet: IP00
Foot protection with accessories: IP20
Installation height: up to 2000 m
Installation: screws
Type connection: screw terminals
Max. cross-section of the head lance conductor (copper): 1 x 50 / 1 x 70 / 2 x 35 mm²
Max. cross-section of ceramic lancet conductor (copper): 1 x 4 / 2 x 2.5 mm²
Dimensions (H x W x D): 156 x 90 x 170 mm
Vaga: 1.9 kg