Contactor DILM170 RAC240 EATON

Description Contactor DILM170 RAC240 EATON

Nominal operating flow Ie (AC-1, 690 V, θ ≤ 40 °C): 200 A
Nominal operating stage Ie (AC-3, 400 V): 170 A
Maximum engine power P (AC-3, 220-230 V): 55 kW
Maximum engine power P (AC-3, 380-400 V): 90 kW
Maximum engine power P (AC-3, 660-690 V): 100 kW
Vikoristan category: AC-1, AC-3, AC-4
Rated operating voltage Ue: 690 V AC
Nominal insulation voltage Ui: 1000 V
Nominal impulse voltage Uimp: 8 kV
Number of poles: 3
Type of head contacts: 3 NO (normally open)
Coil type: RAC (cold stream)
Control coil voltage Uc: 240 V AC
Coil control frequency: 50/60 Hz
Coil operating voltage range: 0.8 - 1.1 x Uc
Coil starting pressure (at 20°C): 200 VA
Reduced tension of the coil (at 20°C): 22 VA
Number of auxiliary contacts: 1 NO + 1 NC (integrated)
Nominal operating current of auxiliary contacts Ie (AC-15, 220 V): 6 A
Nominal operating current of auxiliary contacts Ie (AC-15, 380 V): 3 A
Nominal operating current of auxiliary contacts Ie (DC-13, 220 V): 0.5 A
Mechanical wear resistance: 10 x 10^6 cycles
Electrical endurance (AC-3, 400 V): 1.5 x 10^6 cycles
Operating temperature range: -25°C to +60°C
Temperature range: -40°C to +80°C
Protection level (clem): IP00
Protection feet (with covers/casing): IP20
Connection type: Screw terminals
Overcut of head contact conductors (single-core): 35-95 mm²
Cutting the conductors of the head contacts (high-conductor): 35-70 mm²
Cross-section of conductors of auxiliary contacts/coil (single-core): 1-10 mm²
Overcut of conductors of auxiliary contacts/coil (high-core): 0.75-6 mm²
Installation: On DIN rail or on screw
Height: 160 mm
Width: 120 mm
Glibina: 170 mm
Vaga: 2.82 kg