Contactor DILM250-S/22(220-240V50/60HZ) EATON

Description Contactor DILM250-S/22(220-240V50/60HZ) EATON

Virobnik: EATON
Series: DILM-S
Model: DILM250-S/22
Product type: Contactor
Number of head poles: 3
Drying category: AC-1, AC-3
Nominal working stage AC-3 (400V): 250 A
Nominal operating power AC-3 (220-230V): 75 kW
Rated operating power AC-3 (400V): 132 kW
Rated operating power AC-3 (690V): 160 kW
Nominal working strum AC-1 (690V): 300 A
Nominal operating voltage (Ue): 690 V
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Nominal short-circuit current (Iq): 50 kA (with gG 400A capacitor)
Maximum switching capacity per short circuit (Icm): 3000 A (400V)
Nominal voltage (Uc): 220-240 V AC
Voltage frequency: 50/60 Hz
Caravan type: AC (with suppressor)
Increased tension of the coil (retraction, 50 Hz): 400 VA (peak)
Increased coil tension (retraction, 50 Hz): 145 VA (average)
Reduced tension of the cat (morning, 50 Hz): 15 VA
Hour of application (retraction): 30-65 ms
Spending hour (release): 15-35 ms
Number of auxiliary contacts NV (NO): 2
Number of auxiliary contacts NC: 2
Type of additional contacts: Added
Mechanical wear resistance: 10 million cycles
Electrical durability AC-3 (250A): 1.5 million cycles
Maximum switching frequency AC-1: 3600 cycles/year
Maximum switching frequency AC-3: 600 cycles/year
Operating temperature range: -25 to +60 °C
Protection level (terminal): IP00
Steps to the guard (from the front): IP20
Installation: Gwent fastening
Cross-section of the connected conductor of the head stake (single-core/multi-core): 95-185 mm²
Cross-section of the connected conductor of the head stake (wire with ferrule): 70-185 mm²
Cross-section of the connected conductor of the auxiliary/core stake (single-core): 1x0.75-2.5 mm², 2x0.75-2.5 mm²
Cross-section of the connected conductor of the auxiliary/ceramic stake (bend with tip): 1x0.75-2.5 mm², 2x0.75-2.5 mm²
Terminal type: Screw terminals
Width: 130 mm
Height: 215 mm
Glibina: 195 mm
Vaga: 5.1 kg
Compliance with standards: IEC/EN 60947, VDE 0660, UL, CSA