Contactor DILMT17 (230V50HZ/240V60HZ) EATON

Description Contactor DILMT17 (230V50HZ/240V60HZ) EATON

Nominal working stage AC-3 (400V): 17 A
Nominal working stage AC-1 (400V): 32 A
Max. engine power AC-3 (220/230V): 4 kW
Max. engine power AC-3 (380/400V): 7.5 kW
Max. motor tension AC-3 (660/690V): 11 kW
Nominal coil voltage (50 Hz): 230 V AC
Nominal coil voltage (60 Hz): 240 V AC
Coil type: Alternate coil (AC)
Head strength contacts (normally open): 3
Number of auxiliary contacts (switched, normally open): 1
Number of auxiliary contacts (switched, normally closed): 0
Stocking category: AC-1, AC-3
Nominal Operating voltage Ue: 690 V AC
Nominal insulation voltage Ui: 690 V AC
Nominal impulse withstand voltage Uimp: 6 kV
Mechanical durability: 10 x 10^6 cycles
Electrical durability AC-3: 1 x 10^6 cycles
Max. alternation frequency AC-3: 3600 operations/year
Protection level: IP20
Operating temperature range (without installation): -25 ... +60 °C
Saving temperature range: -40 ... +80 °C
Maximum installation height (without reduction in characteristics): 2000 m
Type of head lance connector terminals: Screw terminals
Type of core lance connector terminals: Screw terminals
Minimum crossbar of the head lance conductor (single-core): 1 mm²
Maximum cross-link of the head lance conductor (single core): 6 mm²
Minimum strut of the head lance conductor (high-core): 1 mm²
Maximum strut of the head lance conductor (high-core): 6 mm²
Minimum strut of the core lance conductor (single-core): 0.75 mm²
Maximum crossbar of the core lance conductor (single-core): 2.5 mm²
Minimum span of the core lance conductor (high-core): 0.75 mm²
Maximum crossbar of the core lance conductor (high-vein): 2.5 mm²
Tightening torque of the head lance clamp: 2.5 Nm
Tightening torque of the core lance clamp: 1.2 Nm
Tightening torque of the coil (retraction, 50 Hz): 60 VA
Tightening torque of the coil (morning, 50 Hz): 9 VA
Actuated coil tension (retraction, 60 Hz): 60 VA
Avoided coil tension (drawn, 60 Hz): 9 VA
Actuated tension per pole (AC-3): 1.4 W
Vague: 0.35 kg
Mounting type: DIN rail 35 mm or screws
Width: 45 mm
Height: 85 mm
Glibin: 101 mm