Contactor DILMT25 (230V50HZ/240V60HZ) EATON

Description Contactor DILMT25 (230V50HZ/240V60HZ) EATON

Nominal operating flow Ie (AC-3, 220-230V): 25 A
Nominal operating flow Ie (AC-3, 380-400V): 25 A
Nominal operating flow Ie (AC-3, 660-690V): 21 A
Nominal operating power Pe (AC-3, 220-230V): 5.5 kW
Nominal operating power Pe (AC-3, 380-400V): 11 kW
Nominal operating power Pe (AC-3, 660-690V): 11 kW
Nominal operating flow Ie (AC-1, 400V, up to 50°C): 45 A
Nominal operating flow Ie (AC-1, 690V, up to 50°C): 45 A
Nominal insulation voltage Ui: 690 V
Nominal impulse voltage Uimp: 6 kV
Coil voltage Uc: 230 V AC, 50 Hz
Coil voltage Uc: 240 V AC, 60 Hz
Increased tension of the cat (retraction, 50 Hz): 77 VA
Reduced tension of the cat (morning, 50 Hz): 9 VA
Increased tension of the coil (retraction, 60 Hz): 77 VA
Increased tension of the cat (morning, 60 Hz): 9 VA
Rotated tension of the cat (morning, 50 Hz): 2.2 W
Rozsiyuvan tension of the cat (morning, 60 Hz): 2.4 W
Head contact configuration: 3 normally open (NO)
Added additional contacts: 0
Possibility of adding additional contacts: So, front or side blocks
Mechanical wear resistance: 10 x 10^6 operations
Electrical wear resistance (AC-3): 1.5 x 10^6 operations
Temperature of the superfluous core (operation): -25 to +60 °C
Temperature of the superfluous medium (operation, sea stagnation): -25 to +40 °C
Temperature of the midstream (zberіgannya): -40 to +80 °C
Mounting type: On a 35 mm DIN rail or with screws
Step zakhistu (housing): IP00
Protection level (terminals): IP20
Maximum overcut of conductors (head terminals): 1 x (1-10 mm²) or 2 x (1-6 mm²) wire/hard
Maximum overcut of conductors (coil terminals/additional contacts): 1 x (0.75-2.5 mm²) or 2 x (0.75-2.5 mm²) wire/rigid
Width: 45 mm
Height: 85 mm
Glibin: 100 mm
Vaga: 0.42 kg
Nominal frequency: 50/60 Hz
Short-hour vitrimuvan strumova building (Icw, 1 s): 360 A
Compliance with standards: IEC/EN 60947-4-1
Compliance with standards: IEC/EN 60947-5-1
Compliance with standards: UL 508
Compliance with standards: CSA C22.2 No. 14
Certification for marine stagnation: ABS
Certification for marine stagnation: BV
Certification for marine stagnation: DNV GL
Certification for marine stagnation: KR
Certification for marine stagnation: LR
Certification for marine stagnation: NK
Certification for marine stagnation: RINA