Contactor Z-SCH230/40-22 EATON

Description Contactor Z-SCH230/40-22 EATON

Nominal voltage of the coil (Uc): 230 V AC
Frequency of the coil: 50/60 Hz
Number of normally open head contacts: 2
Number of normally closed head contacts: 2
Head configuration contacts: 2NO+2NC
Number of poles: 4
Nominal operating flow (AC-1) at 400 V: 40 A
Nominal operating flow (AC-7a) at 230 V: 40 A
Nominal operating flow (AC-7b) at 230 V: 18 A
Nominal operating voltage (Ue, AC-1): 400 V AC
Nominal operating voltage (Ue, AC-7a/b): 250 V AC
Nominal insulation voltage (Ui): 440 V AC
Nominal impulse Vitrimuvan voltage (Uimp): 4 kV
Coil pressure (when immersed): 9.1 VA
Coil pressure (drying): 3.1 VA
Coil tension (during morning): 1.8 W
Maximum tension of the switch on pole: 2.6 W
Range operating temperatures: -25 to +55 °C
Saving temperature range: -40 to +80 °C
Protection stage (terminal): IP20
Protection stage (housing): IP40
Mechanical wear resistance: 1,000,000 cycles
Electrical wear resistance (AC-7a): 100,000 cycles
Electrical wear resistance (AC-7b): 30,000 cycles
Strut of the connected conductor (single core): 1.5-25 mm²
Strut connected conductor (multi-core with ferrule): 1.5-16 mm²
Tightening torque for screw terminals: 2.1 Nm
Width (modules): 3
Width: 53.5 mm
Height: 85 mm
Depth: 60 mm
Mounting type: DIN rail EN 60715
Compliance with standards: EN 61095, IEC 61095