Contactor DILM 07-10 230V 50Hz EATON

Description Contactor DILM 07-10 230V 50Hz EATON

Nominal operating power Ie (AC-3, 400V): 7 A
Nominal operating capacity P (AC-3, 230V): 1.5 kW
Nominal operating capacity P (AC-3, 400V): 3 kW
Nominal operating capacity tension P (AC-3, 690V): 4 kW
Nominal operating flow Ie (AC-1, 690V, Ta=40°C): 22 A
Nominal insulation voltage Ui: 690 V
Nominal pulse vitrium voltage Uimp: 6 kV
Control coil voltage Uc: 230 V AC
Control coil frequency: 50 Hz
Head pole strength: 3
Head contact configuration: 3 NO (normally open)
Head pole strength: 3
Head contact configuration: 3 NO (normally open)
Head contact strength: 3 auxiliary contacts: 1 NO (normally open)
Nominal operating current of auxiliary contacts (AC-15, 230V): 6 A
Nominal operating current of auxiliary contacts (DC-13, 220V): 0.6 A
Category zastosuvannya: AC-1, AC-3
Mechanical wear resistance: 10 x 10^6 cycles
Electrical wear resistance (AC-3, 400V): 1.3 x 10^6 cycles
Suppressed coil tension (retraction): 63 VA
Supported coil voltage (drying): 8 VA
Rossiyuvana coil power (drying): 2.2 W
Nominal short-circuit power that is visible (1 s): 110 A
Nominal short-circuit current (w by default protection): 1 Short-circuit protection device (gG/gL): 25 A
Maximum switching frequency (AC-1): 1200 cycles/year
Maximum switching frequency (AC-3): 900 cycles/year
Operation hour (retraction): 10 - 22 ms
Hour of use (release): 10 - 22 ms
Overhead temperature (working): -25 °C to +60 °C
Overflow temperature (save): -40 °C to +80 °C
Step of zakhistu: IP20
Mounting type: On a 35 mm DIN rail or with screws
Operating position: Either way
Connection type: Screw terminals
Maximum conductor span (head contacts, solid): 1x(1-6) mm², 2x(1-2.5) mm²
Maximum conductor span (head contacts, wire with ferrule): 1x(0.75-4) mm², 2x(0.75-2.5) mm²
Tightening torque (head contacts): 2 Nm
Maximum conductor span (auxiliary contacts, solid): 1x(0.75-4) mm², 2x(0.75-2.5) mm²
Maximum conductor strut (auxiliary contacts, wire with ferrule): 1x(0.75-2.5) mm², 2x(0.75-1.5) mm²
Tightening torque (auxiliary contacts): 0.8 Nm
Overall dimensions (HxWxD): 75 x 45 x 106 mm
Weight: 0.35 kg
Compliance with standards: IEC/EN 60947, VDE 0660, UL, CSA