Contactor DILM 07-10 24V 50/60Hz EATON

Description Contactor DILM 07-10 24V 50/60Hz EATON

Nominal operating power AC-3 (380-440V): 7 A
Nominal operating power AC-3 (220-230V): 3 kW
Nominal operating power AC-3 (380-400V): 4 kW
Nominal operating power power AC-3 (690V): 4 kW
Nominal heat source AC-1 (40°C): 22 A
Coil voltage: 24 V AC
Coil frequency: 50/60 Hz
Number of head contacts: 3 NV
Number of additional contacts: 1 NV
Nominal impulse voltage (Uimp): 6000 V
Nominal insulation voltage (Ui): 690 V
Nominal operating voltage (Ue): 690 V
Categories hardening: AC-1, AC-3
Mechanical wear resistance: 10 million cycles
Electrical wear resistance AC-3 (7A, 400V): 1.5 million cycles
The tension of the coil is increased when launch (launch): 60 VA
Suppressed tension of the coil in the morning: 5.5 VA
Hour of use (switching of NV contacts): 10-22 ms
Hour of use (opening of NV contacts): 11-21 ms
Short-hour vitrification of strums (Icw, 1 s): 84 A
Short-hour vitrification flow (Icw, 0.5 s): 120 A
Operating temperature range of the medium: -25 to +60 °C
Protection level: IP20
Maximum head conductor rubber (solid/multi-core): 1x (1-6) mm², 2x (1-6) mm²
Maximum span of head conductors (fine-wire with ferrule): 1x (1-6) mm², 2x (1-4) mm²
Maximum span of auxiliary/fiber conductors (solid/high-core): 1x (0.75-2.5) mm², 2x (0.75-2.5) mm²
Maximum crossbar of auxiliary/core conductors (fine-wire with ferrule): 1x (0.75-2.5) mm², 2x (0.75-1.5) mm²
Installation: DIN rail 35 mm or screw fastening
Height: 75 mm
Width: 45 mm
Depth: 85 mm
Weight: 0.26 kg
Finish standards: IEC/EN 60947