Contactor DILM 12-10 230V 50Hz EATON

Description Contactor DILM 12-10 230V 50Hz EATON

Number of poles: 3
Drying category: AC-1, AC-3
Nominal voltage of ceramic coil (AC): 230 V
Nominal frequency of the ceramic coil: 50 Hz
Reduced tension of the coil (retraction) AC 50Hz: 77 VA
Reduced tension of the cat (morning) AC 50Hz: 4.5 VA
Reduced tension of the cat (morning) AC 50Hz: 1.5 W
Hour of practice (vmicannya): 10 - 22 ms
Hour of dismissal (dismissal): 8 - 18 ms
Window delay hour (AC): 10 ms
Nominal operating flow (AC-3, 380-400V): 12 A
Nominal engine power (AC-3, 220V): 3 kW
Nominal engine power (AC-3, 380V): 5.5 kW
Nominal engine power (AC-3, 400V): 5.5 kW
Nominal engine power (AC-3, 415V): 5.5 kW
Nominal engine tension (AC-3, 440V): 5.5 kW
Nominal engine power (AC-3, 500V): 5.5 kW
Nominal engine power (AC-3, 690V): 7 kW
Nominal thermal flow (AC-1, <= 690V, 40°C): 22 A
Rated operating voltage Ue: up to 690 V
Nominal insulation voltage Ui (AC): 690 V
Nominal impulse voltage Uimp: 6000 V
Maximum short-hour vitrification of the stream (1s): 180 A
Quantity added additional contacts NO: 1
Number of added auxiliary contacts NC: 0
Nominal current of auxiliary contacts (AC-15, 220-240V): 6 A
Nominal current of auxiliary contacts (AC-15, 380-440V): 3 A
Nominal current of auxiliary contacts (AC-15, 500V): 2 A
Nominal power of auxiliary contacts (AC-15, 690V): 1 A
Mechanical wear resistance: 10,000,000 operations
Electrical wear resistance (AC-3): 1,500,000 operations
Maximum switching frequency (AC-3): 1800 operations/year
Cross-section of head lance conductors (single-core): 1 x (1 - 6) mm², 2 x (1 - 6) mm²
Cross-section of the conductors of the head lancet (high-core with tip): 1 x (0.75 - 4) mm², 2 x (0.75 - 2.5) mm²
Cutting the conductors of the auxiliary lancet (solid): 1 x (0.75 - 4) mm², 2 x (0.75 - 2.5) mm²
Cross-section of the conductors of the additional lancet (high-core with tip): 1 x (0.75 - 2.5) mm², 2 x (0.75 - 1.5) mm²
Tightening torque (head clamps): 2 Nm
Tightening torque (additional clamps): 0.8 Nm
Operating temperature range (AC-3): -25 ... +60 °C
Operating temperature range (AC-1): -25 ... +40 °C
Saving temperature range: -40 ... +80 °C
Protection level (housing): IP20
Mounting type: on a 35 mm DIN rail or with screws
Overall dimensions (WxHxD): 45 x 75 x 107 mm
Vaga: 0.32 kg
Height above the sea level: up to 2000 m
Appearance standard: IEC/EN 60947