Contactor DILM 50 230V 50Hz EATON

Description Contactor DILM 50 230V 50Hz EATON

Device type: Contactor
Model: DILM 50
Volator: EATON
Nominal operating stage AC-3 (400V): 50 A
Nominal operating stage AC-1 (400V, θ ≤ 60°C): 80 A
Nominal operating stage voltage Ue: 690 V AC
Ceramic coil voltage Us: 230 V AC
Ceramic coil frequency: 50 Hz
Nominal voltage AC-3 (230V): 15 kW
Nominal voltage AC-3 (400V): 22 kW
Nominal power AC-3 (690V): 25 kW
Number of main normally open contacts (NO): 3
Number of auxiliary normally open contacts (NO): 1
Number of auxiliary normally closed contacts (NC): 1
Nominal insulation voltage Ui: 690 V
Nominal impulse vistimulation voltage Uimp: 6 kV
Category of installation: AC-1, AC-3
The tension of the coil is reduced when applied (50Hz): 160 VA
Spozhivana tension of the coil at morning (50Hz): 5.5 W
Mechanical life: 10,000,000 cycles
Electrical life (AC-3): 1,500,000 cycles
Head contact connection type: Screw terminals
Range head lance cable cut: 1 x (6-35) mm², 2 x (6-25) mm²
Auxiliary contact connection type: Screw terminals
Auxiliary lance cable cut range: 1 x (0.75-4) mm², 2 x (0.75-2.5) mm²
Protection level: IP20
Operating temperature range: -25...+60 °C
Saving temperature range: -40...+80 °C
Maximum altitude above the sea level: 2000 m
Altitude: 150 mm
Width: 85 mm
Depth: 160 mm
Weight: 1.5 kg
Compliance with standards: IEC/EN 60947