Contactor DILM150-22 (RDC24) EATON

Description Contactor DILM150-22 (RDC24) EATON

Nominal working stage AC-3 (400V): 150 A
Nominal operating power AC-3 (230V): 45 kW
Rated operating power AC-3 (400V): 75 kW
Rated operating power AC-3 (690V): 90 kW
Nominal working stage AC-1 (400V): 200 A
Nominal operating stage AC-1 (690V): 200 A
Rated operating voltage (Ue): up to 690 V
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Power supply: 24 V DC
Number of head poles: 3
Configuration of auxiliary contacts: 2 NO + 2 NC
Operating frequency: 50/60 Hz
Protection level (clem): IP00
Protection step (from the front side, when installed in a closet): IP20
Mounting type: DIN rail / Screw
Range of operating temperatures in the middle: -25 ... +60 °C
Temperature range: -40 ... +80 °C
Electrical life (AC-3, 400V): 1.5 x 10^6 cycles
Mechanical life: 10 x 10^6 cycles
Overcut of the main conductor (single-core/multi-core): 50-120 mm²
Overcut of the head conductor (bend with tip): 50-95 mm²
Overcut of auxiliary/fiber conductors (single-core/multi-core): 0.75-2.5 mm²
Perezrez auxiliary/supporting conductors (bend with tip): 0.75-2.5 mm²
Head terminal tightening torque: 14 Nm
Tightening torque of the terminals of the auxiliary/core lances: 1.2 Nm
Increased power of the coil (on): 100 W
Increased tension of the cat (morning): 2.5 W
Power supply (per pole): 7.5 W
Overvoltage category: III
Maximum operating altitude: 2000 m
Compliance with standards: IEC/EN 60947-4-1, UL, CSA
Width: 105 mm
Height: 170 mm
Glibina: 168 mm
Vaga: 2.3 kg