Contactor DILM185A/22(RAC240) EATON

Description Contactor DILM185A/22(RAC240) EATON

Nominal operating voltage AC-3 (380-400 V): 185 A
Nominal operating voltage AC-1 (380-400 V): 220 A
Nominal operating voltage AC-1 (690 V): 220 A
Nominal operating voltage Ue: 690 V AC
Nominal insulation voltage Ui: 1000 V AC
Nominal impulse voltage Uimp: 8 kV
Current coil voltage: 240 V AC
Current voltage frequency: 50/60 Hz
Quality head poles: 3
Number of auxiliary contacts: 2 normally open + 2 normally closed
Maximum power of AC-3 motor (220-230 V): 55 kW
Maximum power of AC-3 motor (380-400 V): 90 kW
Maximum power of motor AC-3 (660-690 V): 110 kW
Mechanical life: 10 million cycles
Electrical life AC-3 (400 V, 185 A): 1.5 million cycles
Maximum frequency of alternating AC-3: 900 peremikan/year
Nominal short-hour vitrimation of streams Icw (1 s): 1400 A
Nominal short-hour vitrimation of strum Icw (10 s): 900 A
Nominal short-hour vitrimation of strum Icw (30 s): 600 A
Nominal short-hour vitrimation of strum Icw (60 s): 480 A
Compressed coil pressure (retraction): 400 VA
Compensated coil pressure (drawn): 7.5 VA
Compensated coil tension (drawn): 5.3 W
Operating temperature range: from -25°C to +60°C
Temperature range Saving: from -40°C to +80°C
Protection level: IP20 (for front panel), IP00 (terminals)
Mounting type: Screw fastening
Terminal capacity of head stake (hard wire): 1x(50-185 mm²) or 2x(50-70 mm²)
Capacity of terminals of the head stake (hard wire): 1x(50-185 mm²) or 2x(50-70 mm²)
Capacity of terminals of the auxiliary stake (hard wire): 1x(0.75-4 mm²) or 2x(0.75-2.5 mm²)
Capacity of auxiliary stake terminals (bundle wire): 1x(0.75-4 mm²) or 2x(0.75-2.5 mm²)
Compliance with standards: IEC/EN 60947
Wague: 3.5 kg
Width: 150 mm
Height: 170 mm
Depth: 165 mm