Contactor DILM400-S/22(220-240V50/60HZ) EATON

Description Contactor DILM400-S/22(220-240V50/60HZ) EATON

Nominal operating flow (AC-3, 380-415V): 400 A
Nominal operating flow (AC-3, 690V): 360 A
Nominal operating flow (AC-1, 690V, θ≤40°C): 630 A
Nominal operating power (AC-3, 220-240V): 110 kW
Nominal operating power (AC-3, 380-415V): 200 kW
Nominal operating power (AC-3, 400V): 220 kW
Nominal operating power (AC-3, 500V): 250 kW
Nominal operating power (AC-3, 690V): 355 kW
Number of head poles: 3
Added additional contacts: 2 NO + 2 NC
Nominal voltage of the coil (AC): 220-240 V
Coil frequency: 50/60 Hz
Increased coil tension (on, 50 Hz): 840 VA
Reduced tension of the cat (morning, 50 Hz): 15 VA
Tension relieved coils (on, 60 Hz): 800 VA
Reduced tension of the cat (morning, 60 Hz): 18 VA
Drying category: AC-1, AC-3
Rated operating voltage Ue: up to 1000 V AC
Nominal insulation voltage Ui: 1000 V
Nominal impulse voltage Uimp: 8000 V
Mechanical wear resistance: 5 x 10^6 operations
Electrical wear resistance (AC-3, 400V, 400A): 0.7 x 10^6 operations
Hour of operation (on): 20 - 75 ms
Hours of use (connection): 18 - 75 ms
Additional arc extinguishing hour: 10 ms
Overcut of head contact conductors (wire with ferrule): 70 - 185 mm²
Overcut of head contact conductors (single-core/multi-core): 70 - 240 mm²
Head contact terminal tightening torque: 32 Nm
Reversing the conductors of additional contacts (bend with tip): 1 x (0.75 - 2.5 mm²), 2 x (0.75 - 2.5 mm²)
Cross-section of conductors of auxiliary contacts (solid/multi-core): 1 x (0.75 - 4 mm²), 2 x (0.75 - 2.5 mm²)
Tightening torque for terminals of auxiliary contacts: 0.8 Nm
Protection level (terminals): IP00
Protective feet (with cover): IP20
Range of operating temperatures in the middle: -25 to +60 °C
Temperature range Saving: -40 to +80 °C
Maximum altitude above the sea level: 2000 m
Mounting type: screw
Width: 195 mm
Height: 260 mm
Glibina: 180 mm
Vaga: 7.7 kg
Appearance standards: IEC/EN 60947, VDE 0660, UL, CSA
Nominal short-circuit current Iq (400V, 630A gG): 50 kA
Maximum switching frequency (AC-3): 900 operations/year
Maximum switching frequency (AC-1): 1800 operations/year