Contactor DILMT80 (230V50HZ/240V60HZ) EATON

Description Contactor DILMT80 (230V50HZ/240V60HZ) EATON

Product type: Modular contactor
Model: DILMT80
Coil voltage (AC): 230 V 50 Hz / 240 V 60 Hz
Number of poles: 4
Number of head normally open contacts: 4NO
Number of additional contacts: 0
Nominal operating flow AC-1 (up to 400V, at 55°C): 80 A
Rated operating voltage Ue: up to 400 V AC
Nominal insulation voltage Ui: 440 V AC
Nominal Impulse voltage Uimp: 4 kV
Nominal power per pole (AC-1): 4.5 W
Reduced tension of the coil (retraction): 8 VA
Increased tension of the cat (morning): 2.5 VA
Mechanical durability: 1,000,000 operations
Electrical durability (AC-1): 100,000 operations
Protection level (housing): IP20
Protection level (clem): IP20
Operating temperature range medium temperature: from -25 °C to +55 °C
Saving temperature range: -40 °C to +80 °C
Mounting method: On DIN rail (EN 60715, 35 mm)
Connection type: Screw terminals
Range of conductors (head terminals, monocore): 1 x (1.5 - 50) mm², 2 x (1.5 - 16) mm²
Range of conductors (head terminals, cores): 1 x (1.5 - 50) mm², 2 x (1.5 - 16) mm²
Range of conductors (head terminals, wire with ferrule): 1 x (1 - 35) mm², 2 x (1 - 10) mm²
Range of conductor webbing (ceramic terminals, monocore): 1 x (0.5 - 2.5) mm², 2 x (0.5 - 2.5) mm²
Range of conductors (terminals, rich conductors): 1 x (0.5 - 2.5) mm², 2 x (0.5 - 2.5) mm²
Range of conductor bristles (ceramic terminals, cord with tip): 1 x (0.5 - 2.5) mm², 2 x (0.5 - 2.5) mm²
Width: 54 mm (3 modules)
Height: 85 mm
Glibin: 60 mm
Masa: approximately 0.45 kg
Compliance with standards: EN 60947-4-1, IEC 60947-4-1, EN 61095, IEC 61095