Load switch HIS-25/1 EATON

Description Load switch HIS-25/1 EATON

Nominal flow (In): 25 A
Number of poles: 1
Nominal operating voltage (Ue): 230 V AC
Nominal insulation voltage (Ui): 250 V
Nominal impulse Vitrivan voltage (Uimp): 4 kV
Nominal frequency: 50/60 Hz
Vicoristan class: AC-22A
Rated short-hour vitrium current (Icw) at 1 s: 0.6 kA
Nominal power up to increase vimknennya (Icm): 0.6 kA (cos φ = 0.65)
Position load per pole: 0.6 W
Overvoltage category: III
Columnation level: 2
Mounting type: DIN rail (EN 60715)
Width in modules: 1 TE
Protection level IP (terminals): IP20
Protection level IP (front panel): IP40
Mechanical wear resistance: 20000 cycles
Electrical wear resistance: 10000 cycles
Terminal type: Screw terminals
Cutting conductors (single-core): 1.5 - 25 mm²
Over-cut of conductors (bend with tip): 1.5 - 16 mm²
Over-cut of conductors (bend without tip): 1.5 - 16 mm²
Tightening torque of terminals: 2.8 Nm
Height: 85 mm
Width: 17.5 mm
Depth: 70 mm
Weight: 0.1 kg
Operating temperature range: -25 °C to +50 °C
Saving temperature range: -40 °C to +80 °C
Climatic Durability: Good EN 60068-2-28, EN 60068-2-30
Compliance with standards: EN 60947-3, IEC/EN 60947-3, VDE 0660 part 107