Motor drive NZM2-XR208-240AC EATON

Description Motor drive NZM2-XR208-240AC EATON

Virobnik: EATON
Model: NZM2-XR208-240AC
Device type: Motor drive
Application: For automatic devices of the NZM2 series (ta N(S)2)
Nominal operating voltage: 208-240 V AC
Frequency: 50/60 Hz
Type of heating: Remote electrical (via electrical voltage)
Possibility of local treatment: Yes (manual mode)
Drive functions: Closed, Closed, Reset (RESET)
Added auxiliary contacts: 2 normally open (NO) + 2 normally closed (NC)
Type of auxiliary contacts: To indicate the position of the device (MICKED/BLACKED/SPRATED)
Reduced power (under commutation hour): Approximately 20 VA (10 W)
Practicing hour (mixing): Less than 1 s
Type of connection of ceramic wires: Screw terminals
Wire cut range for connection: 0.75 - 2.5 mm²
Installation: Direct installation on automatic vimicach
Protection level: IP20 (compliant with EN 60529)
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +80°C
Water content: Up to 95% (non-condensing)
Compliance with standards: IEC/EN 60947
Vaga: Approximately 0.5 kg