Hager H250 Circuit Breaker. In=250A. 3-pole, 50kA. LSI, HNC250H

Description Hager H250 Circuit Breaker. In=250A. 3-pole, 50kA. LSI, HNC250H

Virobnik: Hager
Model: H250
Article: HNC250H
Product type: Automatic vimikach
Housing type: Lithium (MCCB)
Nominal flow (In): 250 A
Number of poles: 3P
Type of dispenser: Electronic
Characteristics of the sprayer: LSI (Long-time, Short-time, Instantaneous)
Rated limit switching capacity (Icu) at 400V AC: 50 kA
Rated operating switching capacity (Ics) at 400V AC: 50 kA
Nominal operating voltage (Ue): 400/415 V AC
Nominal insulation voltage (Ui): 690 V
Nominal impulse voltage (Uimp): 8 kV
Frequency: 50/60 Hz
Category: A
Compliance with standards: IEC/EN 60947-2
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 2000 cycles
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +85°C
Protection level (clem): IP20
Mounting type: On the mounting panel / With additional screws
Terminal tightening torque: 20 Nm
Conductor crossbar (bend): 16-120 mm²
Conductor crossbar (hard): 25-185 mm²
Width: 105 mm
Height: 165 mm
Glibina: 86 mm
Vaga: 2.1 kg
Regulation of protection against revantation (L): Ir = 0.4-1 x In
Short circuit protection regulation (S): Isd = 1.5-10 x Ir
Mit short circuit protection regulation (I): Ii = 1.5-12 x In