Contactor 25A, 4NC, 24V Hager ESD426

Description Contactor 25A, 4NC, 24V Hager ESD426

Nominal flow: 25 A
Control coil voltage: 24 V AC
Number of head contacts: 4 NO
Contact type: normally open (NO)
Nominal operating voltage: 230/400 V AC
Frequency: 50/60 Hz
Stacking category: AC-1, AC-7a, AC-7b
Nominal insulation voltage (Ui): 400 V
Nominal impulse voltage (Uimp): 4 kV
Switching strength of AC-1 when 230V: 5.75 kVA
Switching strength AC-1 at 400V: 10 kVA
Switching power AC-7b (motor) at 230V: 2.3 kW
Reduced tension of the cat (morning): 3.2 VA
Reduced coil pressure (start): 8.8 VA
Mechanical wear resistance: 1,000,000 cycles
Electrical wear resistance: 50,000 cycles
Maximum power output per pole: 1.21 W
Conductor retin (hard): 1-10 mm²
Conductor crossbar (bend): 1-6 mm²
Terminal tightening torque: 0.8 Nm
Operating temperature: -10°C to +50°C
Storage temperature: -40°C to +80°C
Protection level: IP20
Mounting type: DIN rail
Width: 2 modules
Height: 83 mm
Glibin: 60 mm
Standard: EN 61095, IEC 1095
Color: gray
Virobnik: Hager
Model: ESD426