Contactor Z-SCH230/40-40 EATON

Description Contactor Z-SCH230/40-40 EATON

Nominal coil voltage: 230 V AC
Nominal operating power AC-1 (resistive voltage): 40 A
Nominal working stage AC-7a (on-demand): 40 A
Nominal working jet AC-7b (low-power motors): 18 A
Number of normally open contacts (NO): 4
Number of normally closed contacts (NC): 0
Number of poles: 4
Rated operating voltage: up to 400 V AC
Nominal Impulse voltage (Uimp): 4 kV
Frequency: 50/60 Hz
Coil type: Alternating Strum (AC)
Reduced tension of the coil (when switched on): 28 VA
Increased tension of the cat (morning): 4.4 VA
Power supply per pole (at Ie AC-1): 1.5 W
Electrical wear resistance (AC-1): 100,000 cycles
Mechanical wear resistance: 1,000,000 cycles
Mounting type: DIN rail (EN 60715)
Width: 3 modules (53.5 mm)
Protection level: IP20
Operating temperature range: -25 to +50 °C
Maximum conductor overcut for head contacts (bend): 1.5 - 16 mm²
Maximum conductor overcut for head contacts (hard): 1.5 - 25 mm²
Maximum overcut of the conductor for the coil (bend): 0.75 - 1.5 mm²
Maximum conductor overcut for coil (hard): 0.75 - 2.5 mm²
Maximum tightening torque of head terminals: 2.1 Nm
Maximum tightening torque of coil terminals: 0.8 Nm
Height: 85 mm
Glibin: 60 mm
Vaga: 0.36 kg
Compliance with standards: IEC/EN 60947-4-1, IEC/EN 61095