Hager silent contactor, with manual control, 25A, 2HB, 230V ERC225S

Description Hager silent contactor, with manual control, 25A, 2HB, 230V ERC225S

Nominal flow: 25 A
Number of NV contacts: 2
Nominal voltage of the coil: 230 V AC
Nominal operating voltage: 230/400 V AC
Frequency: 50/60 Hz
Nominal impulse voltage Uimp: 4 kV
Nominal insulation voltage Ui: 440 V
Increased tension of the coil when switched on: 15 VA
Increased tension of the cat when morning: 2.7 VA
Maximum mutated intensity for roasting lamps: 2000 W
Maximum switched intensity for halogen lamps: 2000 W
Maximum switched voltage for fluorescent lamps (compensated): 950 VA
Maximum switched voltage for fluorescent lamps (non-compensated): 1300 VA
Maximum switching voltage for LED lamps: 450 W
Electrical wear resistance: 500,000 cycles
Mechanical wear resistance: 1,000,000 cycles
Noise level: <20 dB
Width: 2 modules
Mounting type: DIN rail
Housing protection level: IP40
Terminal protection level: IP20
Operating temperature range: -10...+50 °C
Temperature range: -40...+80 °C
Connection type: Screw terminals
Maximum cross-cut of hard cable: 6 mm²
Maximum wire cable cut: 4 mm²
The power of hand-crafted carving: So
Standard: EN 61095