Hager Load Switch, 2-Pole 16A/230V, SBN216

Description Hager Load Switch, 2-Pole 16A/230V, SBN216

Article: SBN216
Number of poles: 2
Nominal flow: 16 A
Nominal operating voltage: 230 V AC
Nominal insulating voltage: 440 V
Nominal impulse voltage: 4 kV
Frequency: 50/60 Hz
Nominal short-hour vitrification flow (Icw): 300 A
Rated capacity before short circuit increase (Icm): 1000 A
Mechanical Wear resistance: 200,000 cycles
Electrical wear resistance: 10,000 cycles
Protection level (clem): IP20
Protection step (when installed in the shield): IP40
Operating temperature: -20 to 50 °C
Storage temperature: -40 to 70 °C
Cross-cutting of hard cable: 1.5 to 16 mm²
Cross cable cable: 1.5 to 10 mm²
Terminal tightening torque: 2.8 Nm
Width in DIN modules: 2
Mounting type: DIN rail
Standard: EN 60947-3
Connection type: Screw terminals
Position indication: Red/green
Height: 83 mm
Width: 35 mm
Glibina: 68 mm
Vaga: 0.134 kg