Hager switch, case-mounted with motor drive I-0-II, 4p, 250A, HIB425M

Description Hager switch, case-mounted with motor drive I-0-II, 4p, 250A, HIB425M

Type of drive: Peremikachach with motor drive
Model: HIB425M
Number of poles: 4
Nominal flow (In): 250 A
Nominal operating voltage (Ue): 400 V AC
Nominal voltage Insulation (Ui): 750 V
Nominal impulse voltage (Uimp): 8 kV
Standing category: AC-22A
Nominal switching voltage AC-22A at 400V: 250 A
Nominal short-hour vitrification strum (Icw, 1s): 5 kA
Nominal shock current (Icm, peak): 10 kA
Frequency: 50/60 Hz
Power input per pole: 11.5 W
Electrical wear resistance: 1500 cycles
Mechanical wear resistance: 3000 cycles
Remixer position: I - 0 - II
Motor drive voltage (Uc): 230 V AC
Motor drive stress (during robot): 15 VA
Motor drive tension (during robot): 15 VA
Motor drive tension motor drive (in cleaning mode): 5 VA
Hour alternation: 3-5 s
Additional contacts (wired): 2 NO + 2 NC
Nominal flow of additional contacts: 6 A
Motor drive control type: Impulse
Possibility of manual emergency control: So
Protection level of the housing: IP65
Mounting type: Wall-mounted / Cabinet
Overall dimensions (HxWxD): 400 mm x 300 mm x 200 mm
Weight: 12 kg
Maximum cut of the connected cable (copper): 120 mm²
Maximum overcut of the connected cable (aluminum): 150 mm²
Terminal tightening torque: 25 Nm
Operating temperature range: -25°C to +55°C
Saving temperature range: -40°C to +70°C
Air humidity: 5-95% non-condensing
Altitude above sea level: up to 2000 m
Compliance with standards: IEC/EN 60947-3