HAVIT SK772BT 10W RGB Black Portable Speaker

Description HAVIT SK772BT 10W RGB Black Portable Speaker

The portable HAVIT SK772BT 10W RGB SOUNDBAR speaker features speakers that deliver good sound quality. The speakers produce 5W x2 output. It has Bluetooth V5.3 and is compatible with Bluetooth, AUX, Micro SD, and USB. The speaker can be used wirelessly or wired.

The speaker body features buttons that easily adjust the volume, control playback and RGB backlighting, and change modes. The speaker has a minimalist design, making it a stylish addition to any interior.

The speaker has a playtime of up to 4 hours, and a charge time of up to 2 hours. The speaker comes with a USB-C charging cable, an audio cable, and documentation. The product has a 1-year warranty.

CONNECTION
1) To turn on the speaker, turn the wheel on the right side of the speaker. Once turned on, the indicator will flash blue.
2) To connect, enable Bluetooth on your smartphone and search for ready-to-pair devices, then select "SK772BT." The next time you turn on the speaker, it will automatically connect to the device it last connected to.
3) To disconnect the speaker from another device, press and hold the "Play" button for 2-3 seconds.
4) To turn off the speaker, scroll the wheel on the speaker body to the left.

PLAYBACK CONTROL
1. To play or pause a track, briefly press the Play button. 2. Scroll the wheel on the right side of the speaker body to increase the volume. 3. Scroll the wheel on the left side of the speaker body to decrease the volume. 4. To play the next track, press and hold >>| for 2 seconds. 5. To play the previous track, press and hold the << button for 2 seconds.

TWS MODE
This mode allows you to connect two identical speakers together to create a surround sound effect and enhance the overall sound. First, set both speakers to Bluetooth mode and do not connect it to your phone. Then, press and hold the "M" button for 2 seconds on one of the speakers (this will be considered the master) to activate TWS mode. The speakers will then connect automatically. Next, turn on Bluetooth on your smartphone and connect to the HAVIT SK772BT speaker. To unpair the two speakers, press and hold the "M" button for 2 seconds.

CHANGING MODES
After simultaneously inserting a Micro SD card, USB drive, and audio cable into the corresponding slots, you can switch between speaker modes. To do this, briefly press the "M" button.

MICRO SD MODE
After inserting a Micro SD card into the corresponding slot, the speaker will automatically begin playing music.

USB MODE
After inserting a USB drive into the appropriate port, the speaker will automatically start playing music.

AUX MODE
The speaker can be used as a wired speaker by connecting the included AUX audio cable. Note: Switching between tracks using the speaker buttons is not available in this mode.

BACKLIGHT CONTROL (RGB)
To turn on the backlight, press and hold the "G" button for 2 seconds. Change modes by briefly pressing the "G" button. To turn off the backlight, press and hold the G button for 2 seconds.

FACTORY RESET
To restore the speaker to factory settings, press and hold the "G" button for 8 seconds. You can now connect it to other devices.

CHARGING
The battery is charged using the included USB-C cable. We recommend charging with a DC 5V, 1A (Max) power source from a laptop or PC rather than a wall adapter.

When charging, the indicator on the speaker glows red. When the battery is charged, the indicator turns off.

PRECAUTIONS:
1. Do not use in high humidity conditions. Page 2. Use near heat sources or mechanical damage may cause premature failure of the device. Page 3. Using the maximum volume level for an extended period of time may shorten the life of the speaker system and adversely affect your hearing. 4. Do not disassemble the device. Page 5. Do not use incompatible power adapters to charge the device.