Contactor CEM 09.10 230V AC ETI

Description Contactor CEM 09.10 230V AC ETI

Nominal operating flow AC-3 at 400V: 9 A
Nominal operating power AC-3 at 230V: 2.2 kW
Rated operating voltage AC-3 at 400V: 4 kW
Rated operating power AC-3 at 690V: 5.5 kW
Nominal operating power AC-1 at 400V: 25 A
Rated operating voltage (Ue): up to 690 V AC
Coil control voltage (Uc): 230 V AC
Coil frequency: 50/60 Hz
Number of head contacts: 3
Head contact configuration: 3 NV (normally open)
Number of added additional contacts: 1
Configuration of installed auxiliary contacts: 1 NV (normally open)
Drying category: AC-1, AC-3
Nominal insulation voltage (Ui): 690 V
Nominal impulse voltage (Uimp): 6 kV
Mechanical wear resistance: 10 x 10^6 cycles
Electrical wear resistance AC-3: 1 x 10^6 cycles
Increased tension of the coil when switched on: 70 VA
Reduced tension of the cat when morning: 8 VA
Operating temperature range: -25 °C to +55 °C
Protection level: IP20
Maximum span of power conductors (hard): 10 mm²
Maximum span of power conductors (bend): 6 mm²
Maximum span of auxiliary conductors (hard): 4 mm²
Maximum cross section of auxiliary conductors (flexible): 2.5 mm²
Mounting method: on a 35 mm DIN rail or with screws
Width: 45 mm
Height: 76 mm
Glibina: 84 mm
Vaga: 0.33 kg