Contactor CEM 32.10 230V AC ETI

Description Contactor CEM 32.10 230V AC ETI

Product type: Contactor
Model: CEM 32.10
Virobnik: ETI
Nominal operating flow AC-3 (at 400V): 32 A
Nominal operating flow AC-1 (at 400V, ≤55°C): 50 A
Nominal operating voltage (Ue): 690 V AC
Nominal insulation voltage (Ui): 690 V
Nominal impulse voltage (Uimp): 8 kV
Nominal coil voltage (Uc): 230 V AC
Strumu cat type Keruvanya: Zminniy (AC)
Voltage frequency: 50/60 Hz
Number of head normally open (NO) contacts: 3
Number of head normally closed (NC) contacts: 0
Number of additional normally open (NO) contacts: 1
Number of additional normally closed (NC) contacts: 0
Nominal power of AC-3 motor (at 230V): 9 kW
Nominal power of AC-3 motor (at 400V): 15 kW
Nominal engine power AC-3 (at 690V): 18.5 kW
Electrical wear resistance (AC-3): 1.3 x 10^6 cycles
Mechanical wear resistance: 10 x 10^6 cycles
Increased coil tension when switched on (AC): 85 VA
Reduced tension of the cat in the morning (AC): 9 VA
Operating temperature range: -25°C to +55°C
Temperature range: -55°C to +80°C
Protection level (IP): IP20
Maximum span of the connected cable (head terminals): 2.5-16 mm² (hard/flexible)
Maximum span of the connected cable (additional terminals): 0.75-2.5 mm² (hard/flexible)
Torque of screws (head clamps): 2.5 Nm
Torque of screws (additional clamps): 1.2 Nm
Terminal type: Screw terminals
Mounting method: Mounting on 35 mm DIN rail / Screw mounting
Overall width: 45 mm
Overall height: 85 mm
Overall depth: 105 mm
Vaga: 0.35 kg
Compliance with standards: IEC/EN 60947-4-1