Contactor CEM 40.11 230V AC ETI

Description Contactor CEM 40.11 230V AC ETI

Product type: Contactor
Model: CEM 40.11
Virobnik: ETI
Nominal operating flow Ie (AC-3, 400V): 40 A
Nominal operating power P (AC-3, 230V): 11 kW
Nominal operating power P (AC-3, 400V): 18.5 kW
Nominal operating power P (AC-3, 690V): 22 kW
Nominal operating flow Ie (AC-1, 400V): 60 A
Nominal insulation voltage Ui (head contact): 1000 V
Nominal insulation voltage Ui (auxiliary contacts): 690 V
Nominal impulse voltage Uimp: 8 kV
Number of head poles: 3
Number of auxiliary contacts: 1 NC + 1 NC
Nominal control coil voltage Uc: 230 V AC
Coil voltage frequency: 50/60 Hz
Reduced tension of the coil (start-up): 120-130 VA
The cat's tension has been relieved (morning): 12-15 VA
Mechanical wear resistance: 10,000,000 cycles
Electrical wear resistance (AC-3): 1,200,000 cycles
Vikoristan category: AC-3, AC-1
Operating temperature range: -25°C to +55°C
Saving temperature range: -40°C to +70°C
Maximum installation height above the sea level: 2000 m
Protection level: IP20
Mounting method: DIN rail 35 mm / Screws
Maximum retin conductors (head contacts, wire): 25 mm²
Maximum conductor span (head contacts, hard): 35 mm²
Maximum conductor span (auxiliary contacts/coil, wire): 2.5 mm²
Maximum conductor span (auxiliary contacts/coil, hard): 4 mm²
Terminal tightening torque (head contacts): 3.5 Nm
Terminal tightening torque (auxiliary contacts/coil): 1.2 Nm
Overall dimensions (WxHxD): 55 x 103 x 114 mm
Vaga: 0.8 kg
Compliance with standards: IEC/EN 60947-4-1