Hager circuit breaker x160. In=100A. 4 points. 40kA. Trigger/Mfix., HNA101H

Description Hager circuit breaker x160. In=100A. 4 points. 40kA. Trigger/Mfix., HNA101H

Series: Hager x160
Article: HNA101H
Device type: Automatic vimikach
Nominal flow (In): 100 A
Number of poles: 4
Nominal operating voltage (Ue): 400 V AC
Nominal insulation voltage (Ui): 690 V AC
Nominal impulse voltage (Uimp): 8 kV
Rated voltage at 400V (Icu): 40 kA
Working life at 400V (Ics): 30 kA
Type of sputter: Thermomagnetic
Thermal protection type: Regulation
Range of adjustment of thermal protection (Ir): 80-100 A
Type of electromagnetic protection: Fixing
Adjustment of electromagnetic protection (Im): 1000 A
Wiki category: A
Frequency: 50/60 Hz
Electrical wear resistance: 6000 cycles
Mechanical wear resistance: 20,000 cycles
Mounting type: Stationary (on the mounting panel)
Added: Gwent squeezes
Maximum cable cut: 70 mm²
Operating temperature: -25...+70 °C
Storage temperature: -40...+85 °C
Protection step (front part): IP40
Compliance with standards: IEC/EN 60947-2
Width: 105 mm
Height: 165 mm
Glibina: 88 mm