Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 1000A, HIC490G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 1000A, HIC490G

Model/Series: HIC490G
Type of transfer pump: Automatic transfer to reserve (AVR) with motor drive
Configuration position: I-0-II
Number of poles: 4
Nominal flow (In): 1000 A
Nominal operating voltage (Ue): 400 V AC
Maximum operating voltage: 690 V AC
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Drying category: AC-33B
Nominal short-hour vitrification flow (Icw) (1s): 50 kA
Nominal limiting current (Icm) (peak): 105 kA
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 3000 cycles
Power supply voltage for motor drive: 230 V AC
Controller voltage: 230 V AC
Increased power of the motor drive: 50 W
It's time for heckling (S1-S2/S2-S1): < 1 s
Hour of transition through the zero position: < 100 ms
Voltage control range (phase-neutral): 80-280 V AC
Voltage control range (phase-phase): 140-480 V AC
Control frequency range: 45-65 Hz
Voltage measurement accuracy: ±1%
Vibration frequency accuracy: ±0.1 Hz
The shutdown of the detected faulty gauge has been adjusted: 0-60 s
Adjusted the rotation adjustment of the main edge: 0-60 s
The delay for starting the generator has been adjusted: 0-60 s
The alternator clamp has been adjusted (cooling): 0-600 s
The muting after a command has been adjusted: 0-5 s
Controller display type: LCD
Communication interface: RS485 (Modbus RTU)
Number of discrete inputs: 2
Number of relay outputs: 4
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +85°C
Water content: 95% non-condensing
Maximum altitude above the sea level: 2000 m
Protection level (front panel of the controller): IP54
Zakhistu step (zagalny): IP20
Congested steps: 3
Compliance with standards: IEC 60947-6-1
Installation method: Vertical, near the shafu
Overall dimensions (WxHxD): 500x600x300 mm
Waga: 45 kg