Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole, 1250A, HIC491G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole, 1250A, HIC491G

Type of attachment: Peremikach AVR
Model: HIC491G
Vikonannya: Corpusne
Number of poles: 4
Nominal flow (In): 1250 A
Robot modes: I-0-II
Drive type: Motorized
Power supply voltage for motor drive: 230 V AC
Nominal operating voltage (Ue): 400 V AC
Nominal insulation voltage (Ui): 1000 V AC
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Nominal limiting voltage (Icu): 50 kA
Nominal short-hour vitrification flow (Icw): 30 kA (1 s)
Drying category: AC-33B
Mechanical wear resistance: 8000 cycles
Electrical wear resistance: 1500 cycles
Mimicking hour: <= 300 ms
Controller type: Microprocessor controller
Caravan modes: Automatic, Manual
Mixing adjustment range: 0.5 - 60 s
Adjustment range for rotation adjustment: 0.5 - 60 s
Adjustment range for generator startup delay: 0.5 - 60 s
Protection against reduced voltage: So
Protection against increased voltage: So
Zakhist in the decline phase: So
Protection against incorrect phase drawing: So
Voltage voltage: Yes (for skin injection)
Vimirvannya struma: Yes (for skin injection)
Vibration frequency: Yes (for skin injection)
Monitoring station: Dzherelo 1, Dzherelo 2, Peremikach Stan
Display: LCD
Communication interface: RS485 (Modbus RTU)
Housing protection level: IP54
Operating temperature range: -5°C ... +40°C
Temperature range: -25°C ... +70°C
Water content: <= 95% (non-condensing)
Height above the sea level: <= 2000 m
Overall dimensions (HxWxD): 1200x800x500 mm
Waga: 200 kg
Mounting type: Under/wall