Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 2500A, HIC494G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 2500A, HIC494G

Type of device: Peremikach AVR
Vikonannya: Housing
Type of drive: Motordrive
Identity of drive: Drive controller
Model/Article: HIC494G
Number of poles: 4
Schematic diagram of the position of the remixer: I-0-II
Nominal flow: 2500 A
Nominal operating voltage: 400 V AC
Nominal insulation voltage (Ui): 1000 V
Nominal pulse vistimulation voltage (Uimp): 8 kV
Intermittent frequency: 50/60 Hz
Statation category: AS-33V
Nominal short-hour oscillating current (Icw): 50 kA / 1 s
Nominal short-circuit switching capacity (Icm): 105 kA
Controller/drive voltage: 230 V AC
Controller tension is reduced: <10 W
Motor drive tension is increased when overmic: <200 W
Protection level: IP54
Mounting type: Undermount or on mounting panel
Case material: Metal
Operating temperature: from -25°C to +50°C
Saving temperature: from -40°C to +70°C
Volucity: up to 95% without condensation
Altitude above sea level: up to 2000 m
Mechanical life: 10000 cycles
Electrical life: 1500 cycles
Robot modes: Automatic, Manual
Microphone type: With a blast
Control of life parameters: Voltage, Frequency
Control functions: Type of reduction/increase voltage, in the low phase, in the wrong phase sequence of phases, depending on phase asymmetry
Configured shutdown parameters: Starting the generator, stabilization of the generator, alternation, rotation, cooling of the generator
Indication of the stage: Stage of generator life, position of the jumper, modes robots
Display: Internal graphic RC display or LED indicators
Communication interface: RS485 (Modbus RTU)
Programmed inputs/outputs: So
Programmed settings: Password