Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 250A, HIC425G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 250A, HIC425G

Product type: Peremikach AVR housing
Model: HIC425G
Purpose: Automatic transfer to reserve (AVR)
Number of poles: 4
Number of working positions: 3 (I-0-II)
Meeking mechanism: Motorized
Nominal operating flow (In): 250 A
Nominal operating voltage (Ue): 400 V AC
Nominal insulating voltage (Ui): 1000 V AC
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Storage category: AC-33B
Nominal short-hour vitrification flow (Icw): 10 kA
Vitrium bath hour Icw: 1 s
Rated capacity before break-in (Icm): 20 kA
Electrical cycle strength (mechanical wear resistance): 5000
Mechanical cycle strength (electrical wear resistance): 1500
Motor drive voltage: 230 V AC
Hour Intermittent: < 300 ms
Controller type: Internal microprocessor
Controller voltage: 230 V AC
Voltage monitoring range: 80-120% of Ue
Frequency monitoring range: ±5 Hz above the nominal frequency
Functions of the controller: Overvoltage, Undervoltage, Phase imbalance, Phase loss, Frequency overvoltage, Underfrequency
Mixing adjustment has been adjusted: 0.5 - 60 s
Adjusted rotation adjustment: 0.5 - 60 s
The delay for starting the generator has been adjusted: 1 - 300 s
Generator tensioning adjusted: 1 - 300 s
Display: RK (LCD)
Koristuvach interface: Keruvannya buttons, LED indicators
Communication ports: RS485 (Modbus RTU protocol)
Journal: So
Possibility of manual care: So, with the help of an emergency handle
Protection of the housing: IP54
Case material: Metal
Installation type: Wall
Operating temperature range: -20°C to +55°C
Temperature range: -25°C to +70°C
Vidosity: < 95% without condensation
Maximum height above the sea level: 2000 m
Compliance with standards: IEC 60947-6-1, IEC 60947-3