Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 3200A, HIC495G

Description Automatic Transfer Switch (ATS) with Motor Drive, Controller, I-0-II, 4-pole 3200A, HIC495G

Nominal flow: 3200 A
Number of poles: 4
Mimicking scheme: I-0-II
Drive type: Motorized
Type of cleaning: Automatic / Manual
Nominal operating voltage (Ue): 400 V AC
Maximum operating voltage: 690 V AC
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Drying category: AC-33B
Nominal short-hour vitrification flow (Icw): 50 kA / 1 s
Nominal peak vitrification flow (Ipk): 105 kA
Power supply voltage: 230 V AC / 24 V DC
Power supply to the motor drive: 50 VA (per hour of interruption)
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 1500 cycles
Intermittent hour: < 100 ms
Controller functions: Voltage monitoring, adjusting trims hour, indication will become, protection from the sinking phase
Adjustment range for trimming and mixing: 0.5 - 60 s
Adjustment range for rotation adjustment: 0.5 - 60 s
Range for adjusting the generator startup delay: 0 - 10 s
Adjustment range for generator cooling trim: 0 - 300 s
Controller display type: RC display
Communication interface: RS485 (Modbus RTU)
Number of auxiliary contacts: 2NO + 2NC (on the skin dzherelo)
Housing class: IP54
Operating temperature range: -25°C to +55°C
Temperature range: -40°C to +70°C
Water content: 5% - 95% (non-condensing)
Maximum operating altitude: 2000 m
Overall dimensions (HxWxD): 1000 x 700 x 450 mm
Mass: 120 kg
Conformity standards: IEC 60947-6-1, IEC 60947-3