Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 1250A, HIC491E

Description Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 1250A, HIC491E

Model: HIC491E
Functional type: Automatic transfer to reserve (AVR)
Mixing configuration: I-0-II
Number of poles: 4
Nominal operating flow (Ie): 1250 A
Nominal operating voltage (Ue): 400 V AC
Maximum operating voltage: 690 V AC
Nominal insulation voltage (Ui): 1000 V AC
Nominal impulse voltage (Uimp): 8 kV
Nominal frequency: 50/60 Hz
Drying category: AC-33B
Nominal short-hour vitrification flow (Icw): 35 kA / 1 s
Nominal peak vitrification flow (Ipk): 77 kA
Drive type: Motorized
Power supply voltage for motor drive: 230 V AC
The power of the motor drive is reduced: < 100 W (peak power)
Humbling hour: ≤ 1 s
Controller type: Induction, programming
Controller voltage: 230 V AC (standalone or connected to the main lines)
Controller functions: Settings parameters, machine monitoring, automatic/manual switching logic, protection
Display type: RC display with switches
Variable electrical parameters: Voltage (phase/linear), flow (phase), frequency, active/reactive/reactive force, force factor (PF), accumulated energy (active/reactive)
Current/voltage accuracy: ±0.5%
Tension/energy measurement accuracy: ±1%
Communication protocol: Modbus RTU
Communication interface: RS485
Number of discrete inputs: 4
Number of relay outputs: 4
Time log: Up to 200 entries with hour marker
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 1,500 cycles (at rated power)
Housing protection level: IP54
Installation method: Vertical / horizontal / sublogovy
Operating temperature range: -20°C to +60°C
Temperature range: -30°C to +70°C
Water content: ≤ 95% without condensation
Main standard: IEC 60947-6-1
Overall dimensions (HxWxD): Not specified
Masa: Not specified