Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 1600A, HIC492E

Description Automatic Transfer Switch (ATS) with motor drive, controller/metering/communications, I-0-II, 4-pole 1600A, HIC492E

Device type: Automatic transfer switch (AVR)
Vikonannya: Corpusne
Control type: Automatic
Drive type: Motorized
Number of poles: 4
Nominal flow (In): 1600 A
Intermittent mode: I-0-II
Nominal operating voltage (Ue): 400 V AC
Nominal insulation voltage (Ui): 1000 V
Nominal impulse voltage (Uimp): 8 kV
Stacking category: AS-33V
Voltage Lantsyugiv keruvannya: 230 V AC / 24 V DC
Intermittent hour: < 100 ms
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 3000 cycles
Controller's presence: Integration
Controller functions (shape): Voltage, voltage, frequency, active/reactive tension, accumulated energy
Controller functions (communication): RS-485 interface (Modbus RTU protocol)
Controller functions (protection): Protection against under/overvoltage, phase asymmetry, phase loss, over/underfrequency
Controller functions (adjustment): Programmed switching delays, rotation delays, generator starting delays
Possibility of manual emergency control: Yes
Housing protection level: IP54
Operating temperature range: -25...+55 °C
Water content: 5-95% (non-condensing)
Durability up to rated short-hour flow (Icw): 50 kA / 1 s
Maximum short burst current (Icm): 100 kA
Compliance with standards: IEC 60947-6-1