Hager H630 Circuit Breaker. In=250A. 3-pole, 70kA. LSI, HED250H

Description Hager H630 Circuit Breaker. In=250A. 3-pole, 70kA. LSI, HED250H

Virobnik: Hager
Series: H630
Model: HED250H
Device type: Automatic generator
Number of poles: 3
Nominal flow (In): 250 A
Nominal limit switching capacity at 400/415 V AC (Icu): 70 kA
Rated limit switching capacity at 220/240 V AC (Icu): 100 kA
Rated limit switching capacity at 690 V AC (Icu): 25 kA
Nominal operating switch production number (Ics): 100% Icu
Discharge type: Electronic LSI
Protective function: Overload protection (L), Short-circuit protection (S), Short-circuit protection (I)
Adjustment range for revantage protection (Ir): 0.4 - 1 In
Adjustment range for short-hour delay (Isd): 1.5 - 10 Ir
Adjustment range for time delay (Ii): 1.5 - 12 In
Nominal working voltage (Ue): 230/400 V AC, 400/415 V AC, 690 V AC
Nominal insulation voltage (Ui): 750 V
Nominal impulse withstand voltage (Uimp): 8 kV
Frequency: 50/60 Hz
Category of installation: A
Protection level: IP20 (terminals), IP30 (with front panel)
Installation type: Stationary
Connection: Screw terminals
Maximum cable span: 185 mm² or 240 mm² (long term)
Moment Terminal tightening: 25 Nm (typical)
Mechanical cycle rate: 20000
Electrical cycle rate: 10000
Operating temperature range: -25°C to +70°C
Saving temperature range: -40°C to +80°C
Compliance with standards: IEC/EN 60947-2