Hager H630 Circuit Breaker. In=400A. 3 points, 50kA. LSI, HND400H

Description Hager H630 Circuit Breaker. In=400A. 3 points, 50kA. LSI, HND400H

Product type: Automatic vimikach
Virobnik: Hager
Series: H630
Model: HND400H
Nominal flow (In): 400 A
Number of poles: 3P
Nominal operating voltage (Ue): 400/415 V AC
Nominal operating voltage (Ue): 440 V AC
Nominal operating voltage (Ue): 500 V AC
Nominal operating voltage (Ue): 690 V AC
Nominal insulation voltage (Ui): 800 V
Nominal impulse voltage (Uimp): 8 kV
Nominal limiting withstand voltage (Icu) at 400/415 V AC: 50 kA
Rated limiting voltage (Icu) at 440 V AC: 36 kA
Rated limiting voltage (Icu) at 500 V AC: 30 kA
Rated limiting voltage (Icu) at 690 V AC: 10 kA
Nominal operational value (Ics): 100% Icu
Rated switching capacity (Icm) at 400/415 V AC: 105 kA
Nominal frequency: 50/60 Hz
Spitter type: Electronic (microprocessor)
Zakhistu type: LSI (Long-hour, Short-hour, Mittevy)
Long-hour adjustment range (Ir): 0.4 - 1 In
Short-hour delay adjustment range (Isd): 1.5 - 10 Ir
Adjustment range of the mitt trim (Ii): 2 - 15 In
Adjustment range for long-hour back-up (tr): 0.5 - 25 s
Adjustment range for short-hour shutdown (tsd): 0.1 - 0.4 s
Wiki category: A
Mechanical wear resistance: 10,000 cycles
Electrical wear resistance: 5000 cycles
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +85°C
Step protection (IP) behind the front panel: IP40
Protection level (IP) for terminals: IP20
Congested steps: 3
Installation type: Stationary
Connection type: Screw terminals
Maximum conductor span: 240 mm²
Approximate height: 280 mm
Approximate width: 140 mm
Approximate depth: 110 mm
Approximate weight: 5.8 kg
Compliance with standard: IEC/EN 60947-2