Holder with PE/N terminals: 11xN+11xPE / 3xN+3xPE

Description Holder with PE/N terminals: 11xN+11xPE / 3xN+3xPE

Model/Article: VZ461
Type of attachment: Trimach with split terminals
Purpose: Division of neutral (N) and chemical (PE) conductors
Conductor connection type: Screw clamp
Housing material: Polyamide (PA6.6), self-extinguishing
Material of flue-conducting parts: Brass, nickel-plated
Color terminal N: Blue
Color of PE: Yellow-green
Mounting method: On DIN rail 35 mm / Screw
Step protection IP: IP20
Operating temperature range: -25°C to +70°C
Temperature range: -40°C to +85°C
Air humidity: Up to 95% without condensation
Compliance with standards: IEC 60947-7-1, EN 60947-7-1
Nominal operating voltage: 400 Volts
Nominal impulse voltage: 6 kV
N-terminal strength (for configuration 11xN+11xPE): 11
Strength of PE terminals (for configuration 11xN+11xPE): 11
Maximum overcut of input conductor N (for configuration 11xN+11xPE): 1 x 25 mm²
Maximum overcut of PE input conductor (for configuration 11xN+11xPE): 1 x 25 mm²
Maximum overcut of output conductors N (for configuration 11xN+11xPE): 10 x 10 mm²
Maximum weekend overrun PE conductors (for configuration 11xN+11xPE): 10 x 10 mm²
Nominal flow (for configuration 11xN+11xPE, input 25 mm²): 100 A
Nominal flow (for configuration 11xN+11xPE, output 10 mm²): 57 A
Screw tightening torque (input terminals, for 11xN+11xPE): 2.5 Nm
Screw tightening torque (output terminals, for 11xN+11xPE): 1.2 Nm
Overall dimensions LxWxH (for configuration 11xN+11xPE): 120 mm x 50 mm x 45 mm
N-terminal strength (for configuration 3xN+3xPE): 3
Strength of PE terminals (for configuration 3xN+3xPE): 3
Maximum overcut of input conductor N (for configuration 3xN+3xPE): 1 x 16 mm²
Maximum overcut of PE input conductor (for 3xN+3xPE configuration): 1 x 16 mm²
Maximum overcut of output conductors N (for configuration 3xN+3xPE): 2 x 6 mm²
Maximum overcut of PE output conductors (for configuration 3xN+3xPE): 2 x 6 mm²
Nominal flow (for configuration 3xN+3xPE, input 16 mm²): 76 A
Nominal flow (for configuration 3xN+3xPE, output 6 mm²): 41 A
Moment of tightening screws (input clamp, for 3xN+3xPE): 2.0 Nm
Screw tightening torque (output terminals, for 3xN+3xPE): 0.8 Nm
Overall dimensions LxWxH (for configuration 3xN+3xPE): 60 mm x 50 mm x 45 mm