Silent contactor 25A, 2NV+2NC, 230V Hager ESC427S

Description Silent contactor 25A, 2NV+2NC, 230V Hager ESC427S

Nominal flow: 25 A
Nominal voltage of the control coil: 230 V AC
Number of poles: 4
Contact configuration: 2 NV + 2 NC
Nominal operating voltage: 400 V AC
Frequency: 50/60 Hz
Increased tension of the coil when switched on: 25 VA
Increased tension of the cat when morning: 1.7 W
Mechanical wear resistance: 1,000,000 cycles
Electrical wear resistance (AC-1): 1,000,000 cycles
Electrical wear resistance (AC-3): 100,000 cycles
Drying category: AC-1, AC-3
Nominal insulation voltage: 500 V
Nominal impulse voltage: 4 kV
Protection level: IP20
Operating temperature range: -10 °C to +50 °C
Temperature range: -40 °C to +70 °C
Mounting type: DIN rail
Width (number of modules): 4
Width: 72 mm
Height: 83 mm
Glibina: 60 mm
Maximum cable cut (hard): 10 mm²
Maximum cable cut (wire with lug): 6 mm²
Maximum terminal tightening torque: 1.2 Nm
Standards: EN 61095, IEC 61095
Terminal type: Gvintovi
Pressure applied per pole: 0.4 W
Maximum surge (1 s): 250 A
Low noise level during operation: Silent