Miniature contactor CEC 09.10-230V-50/60Hz (9A; 4kW; AC3) ETI

Description Miniature contactor CEC 09.10-230V-50/60Hz (9A; 4kW; AC3) ETI

Series: CEC
Virobu type: Contactor
Constructive design: Miniature
Number of head poles: 3
Number of additional contacts: 1NO
Nominal operating flow (AC-3, 400V): 9 A
Nominal engine power (AC-3, 400V): 4 kW
Nominal operating flow (AC-1, 400V): 25 A
Wiki category: AC3
Nominal voltage of the coil: 230 V AC
Coil frequency Keruvan: 50/60 Hz
Nominal insulation voltage (Ui): 690 V
Nominal impulse voltage (Uimp): 6 kV
Mechanical wear resistance: 10,000,000 cycles
Electrical wear resistance (AC-3, 9A): 1,300,000 cycles
Increased coil tension (on): 60 VA
Reduced tension of the cat (morning): 7 VA
Conductor cross-section (head contacts, wire): 1...6 mm²
Conductor overcut (head contacts, hard): 1.5...10 mm²
Conductor overcut (auxiliary contacts, cable): 0.75...2.5 mm²
Conductor overcut (auxiliary contacts, hard): 1...4 mm²
Hour of operation (on): 10-25 ms
Hours of use (unplugged): 10-25 ms
Mounting method: On DIN rail 35 mm / Screw mounting
Protection level: IP20
Operating temperature range: -25...+55 °C
Maximum operating altitude: 2000 m
Overall dimensions (WxHxD): 45x76x82 mm
Vaga: 0.35 kg
Compliance with standards: IEC/EN 60947-4-1