Modular contactor RA 20-20 230V AC ETI

Description Modular contactor RA 20-20 230V AC ETI

Type of switch: Modular contactor
Model: RA 20-20
Virobnik: ETI
Nominal voltage Us (coils): 230 V AC
Frequency of the voltage: 50/60 Hz
Voltage of head normally open (NO) contacts: 2
Number of head normally closed (NC) contacts: 0
Number of auxiliary normally open (NO) contacts: 2
Number of auxiliary normally closed (NC) contacts: 0
Nominal operating jet Ie (AC-1, 230V): 20 A
Nominal operating flow Ie (AC-1, 400V): 20 A
Nominal operating flow Ie (AC-3, 230V): 9 A
Nominal operating flow Ie (AC-3, 400V): 9 A
Maximum tension switching voltage P (AC-3, 230V): 2.2 kW
Maximum switching voltage P (AC-3, 400V): 4 kW
Nominal operating voltage Ue: 230/400 V AC
Nominal insulation voltage Ui: 500 V
Nominal Impulse voltage Uimp: 4 kV
Compressed coil tension (pull): 11 VA
Compensated coil tension (drawn): 2.5 VA
Coil operating voltage range: 0.85...1.1 Us
Mechanical wear resistance (number of cycles): 1,000,000
Electrical wear resistance (AC-1, number of cycles): 100,000
Electrical wear resistance (AC-3, number of cycles): 100,000
Peretyn of the connecting conductor (hard): 1...6 mm²
Strut of the connecting conductor (wire with ferrule): 1...4 mm²
Tightening torque for the terminals: 0.8 Nm
Mounting type: DIN rail (EN 60715)
Width: 2 modules (36 mm)
Height: 85 mm
Depth: 60 mm
Protection level: IP20 (from the front panel)
Operating temperature: -25 to +55 °C
Saving temperature: -40 to +80 °C
Virgin temperature: 35%...85% (non-condensing)
Maximum altitude above sea level: 2000 m
Compliance with standards: EN 61095, IEC 61095